The Lake Country 4 Inch Orange Light Cutting Pads are perfect for spot buffing. These flat & full contact buffing pads work with your rotary buffer or polisher, dual-action polisher or electric drill to correct problem areas in automotive paint easier than ever before.
The smaller polishing surface means you’re only buffing the blemish, not the surrounding paint. Scratches and blemishes often occur in particular areas on a vehicle. Very rarely is your whole vehicle covered with blemishes. If the majority of your vehicle looks relatively new, then there is no need to compound the whole panel. Actually you might create swirls if you use an overly abrasive pad on perfectly fine paint. Using Spot Buffs, you are only addressing the problem, not creating additional ones.
This is an awesome, high density foam with light cutting power. The Orange Foam Spot Buff pad works well for buffing using micro-fine compounds like our Vibra Cut Lite or Diamond Cut by leveling scratches and swirls. You will want to try this pad first before using the yellow pad; you always want to start out with the least abrasive pad necessary for the job and move to the more aggressive if necessary.
This Lake Country Cutting Pad is next to the most aggressive Lake Country Foam 4 Inch CCS Pad.
What Products To Use?
Detail Kings offers a large variety of cutting and lite compounding products. Try using Diamond Cut, Vibra Cut Lite, Foam Pad Glaze II, Buff 'N Bling, or One Step Prep (original formula) with these pads for results past perfection! To receive a mirror like finish, use Detail King's Blue Diamond Polish.
• Diamond Cut - is a modern, fast acting, body shop safe, car polishing compound designed to remove 1000 grit or finer sand scratches or other correctable paint blemishes. . . Learn More
What Else Might You Need?
If you have not already purchased a Lake Country Backing Plate, you will need to with use of these foam pads.