The PRO-8 is a commercial ozone generator designed for use in commercial applications or wherever high ozone output is needed to reduce odors, mold, mildew, and bacteria.
It is our most powerful machine with an ozone output of up to 8000 mgph. (8 Grams per hr.) The PRO-8's high output gets the job done quickly. It is an excellent choice for mold remediation contractors and auto detailers. It has a built in hour meter for use by equipment rental retailers.
It can deodorize an automobile in as little as 15 to 20 minutes because, it is 4 times as powerful as our FM1 & Pro-4.
It is an excellent choice for mold remediation contractors, water and fire clean-up crews, and equipment rental retailers.
When mold and mildew gets really severe in a building, the only recourse is to have the mold-laden material removed and hauled away.
Our machines can be a huge help, prior to, during and after the reconstruction. They can be used in the building to reduce airborne mold spores as well as the mold attached to the surface of material. These spores can enter the lungs and sinuses creating major health problems.
Running this machine over night, prior to the remediation, allows residents to temporarily occupy the building to work or remove furniture and personal belongings while the airborne mold is at reduced levels.
Once all of the debrie is removed, it can help make the air safer for workers to occupy the building, and as the last step in the clean up process to help insure the building passes final air quality inspection.
Ozone is a colorless gas with a distinct pungent odor.
It is a molecule made up of 3 atoms of oxygen. Interestingly, ozone occurs quite readily in nature, in the upper atmosphere protecting us from harmful UV rays, at the beach, in the forest, or near waterfalls. In fact, the odor of fresh spring rain following a thunderstorm comes from nature's creation of ozone. Since ozone is the second most powerful disinfectant, 3000 times that of chlorine; it can easily destroy bacteria, viruses, mold, mildew, and odors.
For continuous operation, turn the timer knob counter clockwise to the Hold position.
For timed operation, turn the dial clockwise to select up to 12 hours of run time. Turn on the power with the large brown knob and adjust the output from 500 to 8000 milligrams per hour. At the end of the elapsed time, the ozone will shut off but the fan will remain running to help the ozone dissipate and turn back into oxygen. The fan will stop when the power is turned off. If stubborn odors persist, repeat the process.
Since ozone is the second most powerful sterilant in existence, it can easily destroy bacteria, viruses, mold, mildew, and odors.
Due to its high output, do not use the PRO-8 in areas occupied by people or animals.
The PRO-8 is also an ideal choice for treating mildew in damp crawl spaces.
Two input filters are supplied with every unit.
The ceramic plates inside the ozone generator should be cleaned with soap and water whenever there is a noticeable drop in ozone output. The housing is made completely from stainless steel for maximum durability.
Specifications:• Case Construction:
Stainless Steel• Coverage:
10,000 sq. ft for odors, 2000 sq.ft. for mold• Electrical:
120 V AC, 1200 watts, 3 Amp Fused• Ozone Output:
Adjusts from 500 to 8000 milligrams per hour• Timer Settings:
Hold ( for continuous operation) or timed from 15 min. to 12 hours• Hour Meter:
Registers usage up to 99,999 hours • Dimensions:
11" L x 15" W x 10" H• Weight:
***Shipping is set at a flat rate - if you would like to order this with expedited shipping (Next Day Air, 2-Day Air, or 3-Day Air) call 724-325-0008 and we can get you the expedited shipping cost. If you select an expedited shipping option and check out online, we will call you with the additional shipping cost.
“Due to California Carb regulations we cannot ship this item to a private residence in California, but we can ship this item to a business address in California.”