Changing the CR Spotless Replacement Resins
is simple and can be accomplished in less than 5 minutes. Simply unscrew the clue watertight housings and remove the resin cartridges. Properly dispose the used resin (it is a non hazardous material but will be slippery if spilled on the floor so be careful!), rinse the cartridge, and refill with new resin. Place the cartridges back inside the housing ensuring the whit cap is in the bottom of the blue housing (black washer still attached to the top), replace the centering ring atop the cartridge and reattach the body of the unit.
When restarting the system, be sure to use a limited flow rate as you purge the air from the empty cartridges. After you hear all of the air discharge from the "business end" of your dispensing device (hose nozzle/pressure washer), get your *spot-free* clean game on and enjoy all the magic behind the science of deionized water!
NOTE: The resin has a shelf life of 12 months to maintain performance to specification. Use of resin after a year (all resin has a 'use by' date stamped on the package) may yield adverse results.